This kit is for someone who wants to run with a single foot brake, replacing the left hand brake. This kit includes the foot brake assembly with custom foot peg brackets to mount the foot brake on right side and adjust foot peg on the left side. Additionally it comes with a single moto caliper and bracket. It includes the brake line.
Visit Website
This is a complete kit to upgrade your stock Rawrr Mantis X to a dual caliper setup with large moto brake calipers (2), left hand moto levers, and right foot brake. This utilizes a custom black anodized foot peg and foot brake bracket. This kit includes a custom dual caliper brake bracket, 2 hydraulic lines, 2 calipers, a left hand moto lever, and 2 custom foot brackets for the foot brake and left foot peg.
Visit Website
Fit a Brembo on your Mantis X Pro with this kit. This kit includes the custom bracket that mounts the caliper to your X Pro, a Brembo rear caliper, brake line and brake lever of your choice.
Visit Website
16" rear wheel for Mantis X and X Pro. This is the same wheel our racers use. This gives more tire options.
Visit Website
Upgrade your bike's pivot shaft with this upgraded pivot shaft. Improving durability for the most punishing riding conditions.
Visit Website
Full moto brake conversion kit including 4 piston moto caliper, master cylinder, brake line and custom caliper adapter.
Visit Website
This kit upgrades the stock rear brakes to moto brakes. You will receive a custom bracket that mounts onto your Rawrr Mantis X, the brake caliper, brake line, and the brake lever ( along with several washers as spacers for the mount. You will need to bleed your brakes with Dot 4 brake fluid.
Visit Website
This is a complete set of front and rear brake calipers, levers and mounts including the hydraulic line upgraded for Dot 4 brake fluid. You will receive custom crafted brackets for the front and rear. Custom colors can be special ordered on request.
Visit WebsiteThis kit upgrades the stock rear brakes to moto brakes. You will receive a custom bracket that mounts onto your Rawrr Mantis X, the brake caliper, brake line, and the brake lever ( along with several washers as spacers for the mount. You will need to bleed your brakes with Dot 4 brake fluid.
Visit Website
Fits stock Mantis, Mantis X and Mantis Mini/R/R17 forks. Not compatible with OEM X Pro forks.
Visit Website
31.8mm bar mount with 2" of lift. Fits Rawrr OEM handlebars.
Visit Website
Mounts 1 1/8" MX Handlebars directly over the triple clamp which will make steering feel heavier. Requires aftermarket handlebars.
Visit Website
Mounting options include stem lock or pressing the stock Mantis stem into the RFloXa triple clamp. Does not fit X Pro brake caliper.
Visit Website
Choose 300mm length. Custom spacers will be required. Spring perch will contact new X and X Pro linkage, so you will have to grind down the top of the linkage.
Visit Website
Black or red rear sprocket for 428 chains. 40T - 58T options. Depending on size, you may need to add or remove chain links.
Visit WebsiteSubscribe to emails to get exclusive offers and be the first to know about promotions and Rawrr news.
